OUR PRODUCTS
-
NO-AX WOOD CLEVER | BRIGHT STEEL
Regular price €119.95 EURRegular priceUnit price / per -
NO-AX WOOD CLEVER | WITH HAMMER
Regular price €139.95 EURRegular priceUnit price / per -
NO-AX WOOD CLEVER | GALVANIZED
Regular price €139.95 EURRegular priceUnit price / per -
NO-AX WOOD CLEVER | GALVANIZED WITH HAMMER
Regular price €159.95 EURRegular priceUnit price / per
Safe and fast wood splitting
Split your wood safely with the NO-AX wood splitting. Place your block of wood on the NO-AXE and hit the top of the block with a solid rubber mallet. You have split your block of wood in one or two strokes.
FAST
With the NO-AX Log Splitter you can split faster than a traditional splitting axe. Place your wood block on the NO-AXE, give 1 or 2 blows on top of the block and you have your desired kindling wood.
EASY
The NO-AXE is easier than a traditional axe. You need fewer skills and run less risk of injury. The NO-AXE is for everyone, from kids to seniors.
SAFE
NO-AXE is safe to use by everyone. From young children to seniors. By using a solid rubber hammer, the NO-AXE is safer than an axe.
USAGE
-
STEP 1: ASSEMBLY
Mount your NO-AXE on a stable tree stump before you start using the NO-AXE. For more information about installation, read our installation manual.
-
STEP 2: GAPS
Place a suitable block that fits completely on the NO-AX blade. Then hit the top of the block 1 or 2 times with a heavy solid rubber hammer to split the block.
-
STEP 3: PROTECT
The regular NO-AXE rusts, this is not a problem. Except on the blade of the NO-AXE. Protect it after use with the supplied rubber protective cap.
-
STEP 4: MAINTENANCE
After prolonged use, the blade of the NO-AXE may become less sharp. Fortunately, this is not a problem, you can easily sharpen it with a file or other sharpening equipment.
EDIT
-
STEP 1: SAWING
Find a tree stump with approximately the same diameter as the NO-AXE. Place the NO-AXE on the tree stump and check whether the tree stump is the correct size. If it protrudes slightly, cut the sides diagonally next to the legs of the NO-AXE.
-
STEP 2: SIGN-OFF
Do you have a tree stump with the correct size or have you just sawn off the remaining edges? Then place the NO-AXE on the tree stump and mark the drill holes on the tree stump via the four notches on the bottom of the NO-AXE.
-
STEP 3: DRILLING
Drill the four required holes at the marked locations on the tree stump. Use a wood drill of the correct size for this in connection with the supplied bolts and washers.
-
STEP 4: ASSEMBLE
Place the NO-AXE back on the wood block, making sure the notches and holes match. Then tighten the bolts with a washer in between in four places using an open-end wrench.
ABOUT NO-AXE
We are NO-AXE, a company that makes fair products
that are 100% designed and developed on Dutch soil. We are looking for
towards solutions to contemporary problems with innovative products
faster, simpler or safer.